When you turn on DreamSender, the image is automatically adjusted, but you can change the settings manually.

Recommended sequence of image adjustment procedures in DreamSender:

1. White Balance is responsible for the yellow and blue tint of the image. In order to set the parameters manually, disable auto balance by unchecking the Auto checkbox. Stick closer to natural skin tones.

2. Red / Green / Blue  is responsible for manual adjustment of red/green and blue colors separately. We recommend using it only after choosing the desired White Balance settings.

3. Exposure changes the brightness of the image without degrading the image quality at the maximum value. In order to set the parameters manually, disable automatic adjustment by unchecking the Auto checkbox.

4. Gain changes the brightness of the image. Do not increase the Gain parameter if Exposure is not already set to its maximum value, as this will affect the quality of the image.

When adjusting the brightness of the image through Exposure / Gain, the image on the preview should be clearly visible. Add additional light sources if necessary.

Do not let the image overexpose. If necessary, you can lower the Gain, and then interact with the Exposure settings.

5. Saturation can make the picture more vivid and saturated. We do not recommend using the -100 to -1 range.

6. Contrast increases the contrast of the picture. We recommend using a range from 0 to 20.

7. Brightness makes the image lighter or darker but greatly reduces the amount of detail. We recommend using Exposure and Gain for the most part. It will have the same effect. The safe range for Brightness is -10 to 10.

You can save your settings as a preset so that you don't have to configure the camera every time you go online:

The saved preset will be available in the Presets drop-down list.