You can download the app here. After downloading it, install it on your computer.
Please note: DreamSender can be launched only after you turn on the VR camera. 

1 VR Camera: In this tab you can adjust the image from the VR camera and receive information regarding the VR camera in usage.

2 2D Camera: If a 2D camera is directly connected to Dreamsender, in this tab you can adjust the 2D camera settings.

3 Streams: This tab contains a list of connected platforms and links to broadcast in VR and 2D.

4 Device: Here you can examine and configure the list of connected devices: VR and 2D cameras and a microphone.

5 Gyro: This tab displays gyroscope information. Here, you can make sure that the position of the VR camera is within the recommended value range or set up the camera using a more comfortable angle within the recommended gyroscope values. If the VR camera is at an angle, an exclamation mark will appear next to the Gyro icon. The red numbers will tell you how to rotate the camera. Roll is responsible for the vertical position, and TILT is for the horizontal.

6 Settings: Here you can adjust the bitrate, encoding parameters for 2D and VR, change the preview, check the stereo and configure sound notifications from the platform (which are disabled by default).

 Start DreamSender and log in by pressing the SIGN IN button. Use the username and password from the Dreamcam.com website to log in.

 Select a VR camera, click on the START button located on the right side of the camera selection column.

How do you know if DreamSender was set up properly?

 • VR and 2D cameras are connected, the STOP indicator is on.

 • 2D camera resolution is specified at at least 1280x720, 24-30 fps.

 • the microphone source is selected, and the ON indicator is green. The specified sample rate is 48,000 Hz.

 • Bitrate is specified in VR ENCODING settings: 5000 - 10,000, GOP = 100.

 • Bitrate is specified in 2D ENCODING settings: 1200-2500, GOP = 50-60.

 • Camera tilt angles are within the recommended range.

You can verify that in the DreamSender "Gyro" tab.

If the VR camera is at an angle, an exclamation mark will appear next to the Gyro icon. The red numbers will tell you how to rotate the camera. ROLL is responsible for the vertical position, and Tilt is for the horizontal.