Connect your camera to your PC and install the VR software

USB Type-c used to connect the camera to a PC

Take your camera out, set it up on a tripod or something else, and plug in the power. 

Please note: a tripod is not included with the camera.

In order to connect the camera to the computer, take out the USB-C from the box and connect it to the corresponding port of the computer and the camera. Watch the video "Connect the camera to the computer and install the VR software ".

1. Hold the camera POWER ON button for 1 second. The power indicator will flash blue.

2. The camera is connected and ready for use. Make sure the blue power indicator is not blinking.

It is very important to install the VR camera so that it stays in place but at the same time you’re able to adjust the angle.

You may need to move the camera to a different location in the room or change the viewing angle during the broadcast, so we recommend choosing a mount with 2-axis adjustment.

When setting it up on a table, make sure the camera doesn’t shake during typing. This creates an earthquake effect for the user.

Photo tripod with an adjustable platform (2 axes).

Pantograph + ball head for a tripod with lock. Pay attention to the fact that the thread format of the pantograph and the ball head fixator need to match. They are available in either 3/8 or ¼ options. Find out this information when ordering a mount. 

Fujimi FT10SM or Falcon Eyes Travel Line 4500

Fujimi Stand FJUMB-001 + Tripod Head Fujimi FLBH-M

If the threads of the mount and the tripod head do not match, you can use the adapter Falcon Eyes SP-H F8M4.

However, you can choose other similar models. 

You can download the app here. After downloading it, install it on your computer.

Detailed instructions for working with the program can be found here.  

Please note: DreamSender can be launched only after you turn on the VR camera.